M-TRACE - Electrocardiographs

M-TRACE MOBILE is a modern ECG register purposed for the private use by a patient at their home.

Simple handling of the device allows a patient to conduct the ECG test of similar quality as the one conducted by the clinical devices. Each M-TRACE MOBILE is remotely configured and controlled by a doctor and it can be updated from the central level. It also allows a doctor to remotely set up signal registration parameters and testing modes.

M-TRACE MOBILE testing modes:

Single test

Event holter

By the visual and audio indicators, M-TRACE MOBILE communicates incorrect contact between patient’s skin and electrodes.

GSM/GPRS module of the class 12, that works in the GSM 850/900/1800/1900 MHz quad band

Voice communication

Automatic deletion of the test result after a receipt of confirmation that it was collected and registered by the System.

Remote configuration of parameters of the device: sampling frequency, activated filters, registration time

Test result sent to the System in the ECG-SCP format accordingly with the EN1064 norm

Communication with the System directly by the http or https protocol

Possibility of remote firmware software updates

ECG leads: 6 standard I,II,III, avR,aVL,aVF, cable with 3 or 4 leads

Time of test record up to 60 seconds, remote set-up

Battery: LI-jon 1100mAh

Frequency range: min. 0,05 – 100 Hz.

CMRR: >100 dB ( with a 4 leads cabel)

Input impedance > 10M

Range of steering > 12mVpp

A/C, 24 bit converter

Signal resolution – 0,5uV/bit

Sampling frequency: 1000Hz, programmed from the System

Digital filtration: 50Hz, 35Hz, 25Hz, isoline filter

In case of lack of network: 40MB of testing memory

Go to the M4Medical