AGA OP-POWER-MAT operation table - Universal operating tables

This model is based on the multi-function table AGA-POWER-MAT. The AGA-OP-POWER MAT operation tables (Article No. MP-1050/5Y and MP-3050/5Y) differ from the AGA-POWER-MAT only in the height adjustment mechanism. The hydraulic height adjustment on the AGA-OP-POWER-MAT is done with a centrally located foot pump.

Operation table with hydraulic height adjustment

• The hydraulic height adjustment is done by a centrally located foot pump and an anodized aluminium lifting column.
• All tabletop sections are manually adjustable. With this design, the AGA-OP-POWER-MAT can operate independently of an electrical power source and is therefore available at a very attractive price.
• The detachable tabletop sections (thickness 65 mm) are made of soft polyurethane foam and upholstered with electrically conductive synthetic leather, colour black.
• The headrest is continuously adjustable (+/-30°) and secured with a clamping rod locking mechanism.
• Continuously adjustable back and leg sections, whereby the leg rests can be individually dropped down (-90°) with a gas spring mechanism.

Adjustment Ranges

• Height 785 to 1085 mm
• Headrest +20°/-30°
• Backrest +45°/-20°
• Trendelenburg 20°
• Reverse Trendelenburg 8°
• Seat section +40°/-10°
• Leg sections 0°/-90°

Options

- Plastic-coated steel frame and plastic base cover (Article No. MP-1050/5Y).

- Glass bead blasted stainless steel frame and stainless steel base cover (Article No. MP-3050/5Y).

- Compartment for X-ray tape (Article No. MP-RF), approx. 435x305 mm, under the seat section. Retrofitting is not possible.

- Stainless steel tray (Article No. VA-30/MP), approx. 250x190x45 mm. Retrofitting is not possible.

- Upholstered pads (Article No. MP-PAL), thickness 40 mm, antistatic according to ISO 2882. The upper surfaces are seamless. Hooks and loops fasteners are located on the undersides to attach the pads to the 15 mm thick radiolucent support plates.

- Removable, split and vertically/laterally adjustable leg plates (Article No. MP-BTSA) instead of the standard leg sections which can only be dropped down 90° (Vertical adjustment: 0°/-90°, lateral adjustment/spread: 0°/90°).

- The AGA-OP-POWER-MAT is also available with an adjustable headrest by gas pressure spring (Article No. KVG), instead of headrest adjustment with clamping rod locking mechanism.

Non-conductive synthetic leather upholstery is also available for this operation table in other colours (see upholstery colours). In this case, the table will be a custom-made product which cannot be returned or exchanged.

Accessories

On the outside of the leg, seat and back section frame, the standard rails (25x10 mm) allow the installation of various optional accessories:

• Arm supports, leg and hand cuffs, instrument table, body strap, anesthesia pole, side and shoulder supports, arm/hand operating table, side safety rails and leg supports.

The product descriptions and article numbers for the following accessories can be found under Operating Room Accessories and in the AGA catalogue on page 33.

The following accessories are also available for the AGA-OP-POWER-MAT operating table:

•  Paper roll holder - Article No. PU-2049
•  Central locking castor system - Article No. LR/Z-50 (Ø 50 mm).

Please note that these optional accessories are not retrofittable.

Further evolution of the AGA-OP-POWER-MAT into MP-1050/5YGYN and MP-3050/5YGYN

The operation table AGA-OP-POWER-MAT was further developed into an even more versatile multi-function table, which is especially well-suited for the field of gynaecology. The various configurations and options available are detailed online or in our catalogue on page 21.

•  MP-1050/5YGYN

The AGA-OP-POWER-MAT is available under article No. MP-1050/5YGYN with the following components included in the listed price for the table:

o  A cut-out in the pelvic section
o  Split, removable and spreadable leg sections (Article No. MP-BTSA)
o  40 mm-thick upholstered pads with radiolucent support plates (Article No. MP-PAL)
o  Plastic-coated steel tube frame and a plastic base cover

•  MP-3050/5YGYN

The operating table MP-3050/5YGYN includes the same components as MP-1050/5YGYN, and has a glass-bead blasted stainless steel base frame and cover.

•  Accessories

Following accessories are available for the operating tables MP-1050/5YGYN and MP-3050/5YGYN.

o  Leg rests (set of two), Göpel-type - Article No. BHG-600
o  Mounting clamps (set of two), Göpel-type - Article No. BKG-600
o  Ring-shaped armrests (set of two) - Article No. RL-2060
o  Stainless steel pan - Article No. VA-30/MP - not retrofittable. The drop tray measures approx. ca. 250 x 180 x 75 mm.
o  Paper roll holder - Article No. PU-2049 (not retrofittable)
o  Central locking castor system, Ø 50 mm - Article No. LR/Z-50 (not retrofittable).

Overview: AGA-OP-POWER-MAT : an economical, multi-purpose operation table

• Height adjustment mechanism - hydraulic with foot pump
• Height adjustment range 785 - 1085 mm
• Width 500 mm
• Length 1900 mm (headrest 295 mm, backrest 575 mm, seat section 360 mm, leg sections 520 mm)
• Maximum load 130 kg
• Frame - steel tubing, see Frame Colours / stainless steel
• Upholstery - electrically conductive, colour: black
Thickness 65 mm (standard pads) or 40 mm (upholstery pads MP-PAL, at extra charge)
• With earth contact (non-conductive also available)

> Product Flyer (PDF)

Upholstery - Electrically conductive synthetic leather

• The electrically conductive synthetic leather MEDISTAT (Griffine) is specially designed for medical use and available in the color black.

• The MEDISTAT synthetic leather is made of a cotton / polyester blend and a coating of 100% PVC compound. It is characterized by its tensile strength, durability, longevity, easy cleaning and resistance to disinfectants.

• The electrically conductive (antistatic) synthetic leather upholstery is included in the price for the operating and multi-function tables in the price. Is is also available for all AGA tables and chairs at extra charge.

• In addition, we offer the option of having the upholstery done in other colours or other synthetic leather brands than the standard ones. The corresponding materials should be sent to us after prior arrangement.

The corresponding product descriptions and article numbers for the OP-POWER-MAT and its equipment options can be found in the AGA product catalogue on pages 20-21.

Interested? Contact us at +49 (0)5731 82283 or  This e-mail address is being protected from spambots. You need JavaScript enabled to view it . We'll be happy to help you further.

Link to product page: http://www.agasan.com/en/aga-op-powermat.html