DESCRIPTION OF Aquatron water still - A4000, A4000D, A8000 - Laboratory water stills and softeners
Fully automatic operation
High purity pyrogen free output
Low temperature distillate
Operates from any raw water supply
Reservoir level control
Simple conversion to pre-treated feed
Supplied with wall mounting bracket
Safety features allow unattended operation
Simple to clean
Three models are available giving outputs of 4 or 8 litres/hour single or 4 litres/hour double distilled water. The high quality PYREX® borosilicate glassware coupled with silica sheathed heaters gives pyrogen free distillate of the highest purity from virtually any raw water supply.
The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. This produces cold distilled water ready for immediate use and pre-heats the boiler feed to increase efficiency.
All glass construction allows rapid descaling using strong mineral acids. A built in "clean" function and integral acid addition funnel make the cleaning operation simple and safe with no need to dismantle any of the glassware. A large bore ROTAFLO® stopcock with PTFE key is fitted for easy draining of chemicals after cleaning.
A flow sensing device will detect any reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low pressure supplies down to 3psi (20kPa). As a fail-safe device there is an over-temperature thermostat mounted in the boiling chamber.
The Aquatron is very easy and safe to assemble and maintain. Both the acrylic safety screen and the cabinet lid are removable giving unrivalled access to the glassware components. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage.
Every Aquatron® water still is supplied with a reservoir level control.
The control is a simple and effective system which can be fitted to virtually any type of reservoir vessel. It will turn the still off when the reservoir is full and restart it when the level in the reservoir drops as distilled water is removed for use making it fully automatic. water purification
SPECIFICATION OF Aquatron water still - A4000, A4000D, A8000 - Laboratory water stills and softeners
| Applications: | laboratory |
| Operation: | automatic |
For any further information about the Aquatron water still - A4000, A4000D, A8000, their prices or the suppliers, please, contact us online by Skype, e-mail or phone. We maintain close partnership with the manufacturers and can therefore offer you the best Aquatron water still - A4000, A4000D, A8000 deals. We provide online customer support and can help you with assistance in contacting the manufacturers, so you would not have to worry about where to buy necessary medical equipment or how much does Aquatron water still - A4000, A4000D, A8000 cost.
Our job is to provide our clients with necessary information about the products presented in Deviceinformed.com (including high resolution photos and detailed specifications), as well as help them to get in touch with the suppliers in order to buy all needed products at best prices in the market. We can guarantee excellent quality brand new medical equipment from globally acclaimed suppliers and manufacturers and an opportunity to purchase leading medical devices at good cost.
